FALL-LINE MOTORSPORTS SCORES A PAIR OF TOP-10s at KANSAS SPEEDWAY

Kansas City, KS (August 18, 2013) – It was an uphill battle for the three Fall-Line Motorsports BMW M3s as they did not qualify as well as they would have liked for yesterdays’s SFP Grand Prix at Kansas Speedway, Round 9 of the 2013 Continental Tires Sports Car Challenge Series. In true Fall-Line form, all three BMWs made their way to the front with the #45 and #46 leading laps and two cars finishing in the top-ten. The #46 finished P4, with Bryan Sellers back behind the wheel and the #48 finished P7 with Trent Hindman closing out the race. The #45 lost drive just over halfway through the race and finished 17th after heading back to the garage on lap 48.

Finished P4, Fastest Race Lap 1:22.126.

Mark Boden drove the first stint in the#46 Trim-Tex Drywall Products/ Fall-Line Motorsports BMW and after qualifying 15th, pitted from the lead with an hour-and-a-half remaining in the race under full course caution. This set-up Bryan Sellers in a good position, and he came out 10th after all the pit stops shook out. Most competitors made their stops before the yellow, but the #46 just barely missed it, thus, pitting under caution and losing valuable track position. Sellers quickly moved up and stayed between 3rd and 5th place for the entirety of the race. He made a last-minute move on the final re-start with two laps remaining to grab the final spot on the podium but could not hold off the Roush Mustang driven by Shelby Blackstock. He didn’t try to force a move on the faster car and settled for P4 which earns solid points for the #46 and Mark Boden.

Finished P7, Fastest Race Lap 1:21.908.

Charles Espenlaub started the race in the #48 Cirocco Ozzimo/ Atlas Acon/ D Interiors/ Fall-Line Motorsports BMW which is a change in the typical driver order for the #48. Espenlaub was the strongest of the Fall-Line cars in the first stint, running as high as 4th after making an impressive  pass into turn 1 on a competitor. Espenlaub was the first Fall-Line car to pit, handing the driving duties over to Trent Hindman after a green-flag stint over an hour long. Hindman has become quite the young driving sensation in just a short amount of time as the 17-year old took over finishing duties in his third CTSCC race ever and drove a fantastic race. He drove solidly, stayed out of trouble, took care of his equipment and finished 7th. He never gave up, turning his fastest time of the race on the final lap.

 

Finished P17, Fastest Race Lap 1:22.621.

Hugh Plumb started 14th in the #45 Eagle/ B+ Foundation/ Fall-Line Motorsports BMW but quickly moved up through the field and left the mid-packers in his dust. With 45 laps complete, he pitted just before the caution and put Al Carter in 4th position when he began his stint.. Carter took over but soon it became clear that there was a terminal problem with the engine. The team rolled the dice and decided to keep him out with the hopes that it would hold on to the end of the race. Sadly, it did not and the engine blew in spectacular fashion with an hour left in the race.

 

Team Manager Michael Harvey: “While two out of three is not a bad way to finish the race, I feel for the #45 car who just can’t seem to catch a break. All of our drivers and crew did a fantastic job to get all three cars up to the front of the field where they should be and even though this is not one of the stronger tracks for the BMWs we made the most of it and gained points for the #46 and the #48. With just two races remaining, I still feel that we’ve hit our stride and can continue to deliver solid results for all three cars.”

A replay of the Continental Tires Sports Car Challenge SFP Grand Prix can be viewed on August 18 at 4p ET. Next up is Round 10 on September 7-8 at Mazda Raceway Laguna Seca.

Fall-Line Motorsports is a premiere builder and fabricator of racecars for all levels of competition. Fall-Line specializes in BMW, Porsche, Audi and other high-performance makes. Fall-Line Motorsports unveiled their Grand-Am team in 2006 and won the GRAND-AM Continental Tire Sports Car Challenge GS Championship title in 2010. In addition to fielding 3 GS BMW M3’s in the Continental Tire Sports Car Challenge, Fall-Line also prepares and fabricates cars for other CTSCC teams, SCCA and NASA drivers, track day prepared and high performance street vehicles.www.fall-linemotorsports.com

Trim Tex Drywall Products global headquarters and manufacturing facility, located in Lincolnwood, Illinois, is the most modern and efficient in the industry. Trim-Tex also has a satellite facility located in Orange, California. Both facilities feature a Design & Training Center where architects, builders, and contractors can be inspired and educated. With a combined inventory of well over 100,000 boxes of product and a 40-year history of 100% in-stock, Trim-Tex sets the standard for same day shipping. Trim-Tex doesn’t just make decorative products. In fact, Trim-Tex has over 20 patented drywall products designed to improve installation quality and design aesthetics in commercial and residential projects worldwide. www.trim-tex.com@TrimtexDrywallwww.facebook.com/TrimTex

ABOUT THE B+ FOUNDATION: The Andrew McDonough B+ Foundation honors the memory of Andrew McDonough. Andrew’s mom, dad and sister founded The Andrew McDonough B+ Foundation. The overall goal of The B+ Foundation is to “Do Good”. During the racing season, Al Carter and Hugh Plumb visit kids with cancer in hospitals before racing events to make a positive difference and keep the “B+” message alive through outreach efforts and talks. The B+ Foundation provides financial assistance to families of children with cancer nationwide. In the last two years, The B+ Foundation awarded over $1,000,000 to families of children with cancer while giving over $500,000 to support research efforts. Information about the Foundation and its activities can be found at www.BePositive.org.

Atlas Acon Electric Service Corp.:

With a reputation spanning over 50 years, Atlas-Acon provides full-service electrical contracting for new construction, renovations, as well ongoing service and maintenance in the commercial and industrial markets in the greater New York area. Atlas-Acon works with some of the largest general contractors, construction managers, architects and engineers utilizing its vast expertise to manage project-specific schedules in a cost effective manner. The construction needs of its corporate clients are diverse and unique and Atlas-Acon prides itself on creating and developing innovative solutions.

www.atlasacon.com

Cirocco & Ozzimo Inc. is a commercial exterior and interior renovation contractor serving the Tri-State area of New York, New Jersey and Connecticut. Cirocco & Ozzimo is recognized as us one of the top concrete firms in the New York City metro area and specializes in masonry, plaster and fireproofing to Building Owners, General Contractors and Consultants for building renovations and new construction.

www.ciroccoandozzimo.com